37, Jalan 10/91,
Taman Shamelin Perkasa,
Cheras,
56100 Kuala Lumpur,
Malaysia.
103A, Jalan Pasar,
Pudu, 55100
Kuala Lumpur, Malaysia.
+603-9224 6433
+6012-270 2208
Petaling Jaya Showroom
L1.31 First Floor, Amcorp Mall,
18, Jalan Persiaran Barat,
46050 Petaling Jaya,
Selangor, Malaysia.
+603-7955 2091
+6018-225 5160
Rega Apheta 3
Previous | 9 / 9 | Next |
A unique design.
Rega’s Moving Coil cartridge design is unique in its approach to achieving an ultra-low mass generator which is undamped (no tie wire) using a unique rhomboid pivot for the cantilever powered by a purpose designed, exclusive to Rega, Neodymium magnet system. This type of design requires a zero-tolerance engineered cartridge body which is Rega’s area of expertise and with the Apheta 3 these bodies are machined from one piece of the highest quality aluminium. This is a difficult and expensive process requiring all of Rega’s years of experience to achieve. In particular, the “zero” tolerancing of the body is required in the alignment and dimension of the pivot pad mounting hole and the magnet mechanism mounting hole relationship.
Conventional MC cartridges utilize a steel suspension system (tie wire) which creates a high amplitude H.F. resonance (normally around 8-12kHz). Such resonance is unacceptable and is usually damped by a rudimentary piece of foam rubber. However, the foam rubber deteriorates with age and cannot prevent the complete structure from vibrating and ''ringing''.The specifics and adjustment of the tie wire and damping determine whether the cartridge is under damped (bright) or over damped (warm and bass heavy).
A happy medium is rarely achieved.This encouraged Rega to pursue a new direction inspired by modern materials and the basic laws of magnetism. The Apheta 3 contains neither a tie wire nor a foam damper. Moving coil aficionados will all recognise the long search for super clear, high frequency combined with firm, tight bass, characteristics all Rega moving coils exhibit.
Tracking Pressure 1.9 - 2.00g
Input load impedance 100 ohms
Output impedance 10 ohms
Nominal output voltage 350μV
Channel Balance : ≥ 20μV
Separation : ≥ -29dB
Mass 6g
Key Features :
Iron cross & coil assembly 50% smaller than the original Apheta .
One of the world's smallest MC generators.
Cutting edge neodymium magnet.
Fine Line profile nude diamond stylus.
High specification fine wire.
Load settings for adjustable MC stages
Impedance -100ohm
Capacitance - 1000pF
Gain setting - High ('On' position for Rega phono stages)