The Rega RX-FIVE loudspeaker system delivers  balance, detail and dynamics thanks to a unique handmade set of three Rega designed drivers and crossover. The newly developed DX-125 bass mid-range driver (using a doped paper cone) is at the heart of the RX range and combines perfectly with the Rega ZRR high frequency and RR7.8 bass unit. These custom units are mounted in a newly designed cabinet enclosure constructed from 18mm MDF and covered in a choice of three beautiful real wood veneers.The RX-FIVE will integrate perfectly into any home and deliver exceptional performance and musicality with a smooth and accurate bass response.


Product Details


The RX-FIVE’s are a medium sized floorstanding  loudspeaker with a dedicated side firing bass driver. Bass response and imaging can be tuned by adjusting the distance of the speaker from the rear and side walls. As with all loudspeakers, this will be dependant on the size of room, flooring and furnishings, therefore some simple experiments trying different distances will help optimise the performance to your surroundings. If the bass becomes ‘boomy’, you can position the side firing speakers inwards to supress any unwanted bass responses.


Technical Specification

System 2.5way

Cabinet Construction 18mm MDF Real wood veneer

Cabinet Design Band pass enclosure

Dimensions (cm) H x W x D 83.5 x 18.2 x 34.2

Weight (each) 16.6Kg

Reflex Port Front ported

Impedance Nominal 6 ohms

Sensitivity 89dB

Power Handling 110w per channel *

High Frequency unit Rega ZRR

Mid /bass driver (Doped cone) Rega DX-125

Side Bass Driver Rega  RR 7.8

 

*Power handling figures are quoted as a guide. Amplification between 
30w and 500w can be safely used depending on the quality of amplification.

To ensure adequate clearance and prevent damage to the front facia, the grille magnets 
must locate directly onto the drive unit fixing bolts.